Keeping the induction hob clean is not an easy task. Carefully select cleaning products so as not to damage it. The device we do it is not without significance. A rough surface washer could scratch or damage the shiny surface. The induction hob requires special treatment. How to effectively clean the induction hob? And what cleaning products will be the best for it?
How to care for an induction hob to keep it looking beautiful?
For the induction hob to look good, it's best to clean it after each cooking. Of course, this should only be done when the surface has cooled down completely. The main thing is not to leave burned debris or greasy stains for too long. After drying, such dirt is very difficult to clean. It is worth remembering that only soft accessories can be used to clean such a surface. It can be a sponge (on the soft side). Microfiber cloths also work well. They absorb moisture well and have a smooth structure, which is why they don't scratch the disc. Paper kitchen towels, in turn, work well for polishing a shiny surface. If stubborn dirt, such as greasy burnt stains, has appeared on the oven, you can use a scraper. However, only one that is designed for an induction hob.
After choosing the right accessories for cleaning the plate, it's time to think about cleaning agents that will effectively remove dirt. It is best to choose preparations specially created for this type of surface. We have a guarantee that we will not scratch or destroy the induction hob. And most importantly, that effectively and without much effort we will lead her to a perfect look. A good solution is Kernau brand induction hob cleaner. It is a product designed to remove greasy as well as burnt impurities. Not only will it effectively clean the induction hob, but also ceramic and glass gas. It is an odorless preparation ready for use. It can be used without dilution.
How to use Kernau brand induction hob cleaner?
Kernau induction hob cleaner has a specially prepared formula that will allow you to clean the surface of the hob without much effort. It is equipped with a practical sprayer. It significantly facilitates even distribution of the product. Just apply the preparation using a sprayer on a dirty surface and wait a few minutes. Then wipe the disc with a damp sponge. If dirt on the surface is difficult to remove, the operation should be repeated. The final stage of cleaning is rinsing the surface with running water, and allowing it to dry. With the help of soft paper towels, you can polish the surface.
